Steel-cylinder truck for 2 steel-cylinders of 40 - 50 l capacity
Colour:
RAL 5010
|
Wheelset:
Luftbereifung
Welded steel construction With 2 innovativ plastic safety handles Toe of sheet steel with edge surrounded on three sides For easy transport of steel cylinders with a capacity of 40 or 50 l Diameter 210 – 250 mm Cylinder holder with safety chains Permanent surface protection Impact- and scratch-resistant Pneumatic or solid-rubber tyres on steel wheel rim with precision deepgroove ball bearings and plastic wheel cap.
Tyre truck, low
Colour:
RAL 5010
|
Wheelset:
Luftbereifung
Welded steel construciton For tyre diameter 540 - 820 mm With wheel protection guards Makes it easy to pick up, transport and set down whole stacks of tyres Large push bar with soft plastic grip cover Lever system with gas pressure springs Permanent surface protection Impact- and scratch-resistant Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.
new
Tyre truck, low, galvanised
Wheelset:
Luftbereifung
Welded steel construciton For tyre diameter 540 - 820 mm With wheel protection guards Makes it easy to pick up, transport and set down whole stacks of tyres Large push bar with soft plastic grip cover Lever system with gas pressure springs Galvanised Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.
new
Tyre truck, low, galvanised
Wheelset:
Vollgummi
Welded steel construciton For tyre diameter 540 - 820 mm With wheel protection guards Makes it easy to pick up, transport and set down whole stacks of tyres Large push bar with soft plastic grip cover Lever system with gas pressure springs Galvanised Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.
Self-tipper
Colour:
RAL 7016
|
Dimensions - width x depth x height (mm):
1525 x 1205 x 1070
Welded steel construction With roll-away system Tipping by manual release or by contact with container to be filled Automatic return after trough is emptied Fork-lift tunnel for safe transport Facility for retrofitting wheels Various wheel types with different carrying capacities available as options Optional with outlet cock (as ex-factory equipment, not additional mountable).
Push bar trolley with drip tray
Colour:
RAL 5010
Welded steel oil tight With push bar Capacity 42,5 Ltr. Galvanised grating, mesh size 30 x 30 mm Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.
Steel-frame dolly
Colour:
RAL 7016
|
Loading Surface - width x depth (mm):
1010 x 810
Welded steel construction Suitable for pallets or cage pallets Incl. catching corners and fastening eyelets Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.
Dolly collector
Colour:
RAL 7016
Welded steel construction For approx. 40 dollies measuring 600 x 300 mm (W/D) or 600 x 350 mm (W/D) Polyamide tyres with precision deepgroove ball bearings, 4 swivel castors.
Pallet converter Type 65K
Colour:
RAL 7016
|
Dimensions - width x depth (mm):
1200 x 800
|
Usable height (mm):
1600
Welded steel construction Suitable for Euro and industry pallets Stackable, but do not move when stacked For subsequent fitting to loaded pallet Frame parts secured by manual clamping function Stabilised by hooking together 2 horizontal frames at top Permanent surface protection Impact-resistant and scratch-resistant Can be collapsed or folded to save space when not in use.
Drum dispenser with drip tray 203 l capacity
Colour:
RAL 5010
Welded steel construction For moving, storing and emptying 200 l steel drums Lever with plastic safety handle With 2 steel rollers for thin-walled drums With big drip tray 203 l capacity Permanent surface protection Impact- and scratch-resistant Polyamide tyres on roller bearing, 2 swivel castors with brakes and 2 polyamide wheels on one axle.
Furniture truck
Colour:
RAL 7016
|
Wheelset:
Luftbereifung
Welded steel construction With 2 innovative plastic safety handles Bended transverse struts With transparent soft tube cover Toe with antislip covering Permanent surface protection Impact- and scratch-resistant Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.
Pallet converter Type 64
Colour:
RAL 7016
|
Dimensions - width x depth (mm):
1200 x 1000
|
Usable height (mm):
1200
Welded steel construction Suitable for Euro and industry pallets Stackable, but do not move when stacked Grilled, mesh size 100 x 100 mm All sides closed, 1 side wall with fold-down upper half Optional replaceable pallet converter separation grid Permanent surface protection Impact-resistant and scratch-resistant Can be collapsed or folded to save space when not in use.
Bridge plate
Dimensions - width x depth x height (mm):
1250 x 995 x 120
|
Load capacity (kg):
1200
|
Weight (kg):
35,0
Lightly but strong aluminium construction Easy and safelty handling Integrated grip holes With positioning aids that also secure against slipping Inclined and chamfered access areas Anti-slip surface.
Pallet converter Type 75
Colour:
RAL 5010
|
Dimensions - width x depth (mm):
1200 x 1000
|
Usable height (mm):
1555
Welded steel construction Suitable for Euro and industry pallets Stackable, but do not move when stacked All 4 sides with diagonal tubes running from bottom corners to meet at top centre For subsequent fitting to loaded pallet Permanent surface protection Impact-resistant and scratch-resistant Can be collapsed or folded to save space when not in use.
Tyre truck, high
Colour:
RAL 5010
|
Wheelset:
Vollgummi
Welded steel construciton For tyre diameter 540 - 820 mm With wheel protection guards Makes it easy to pick up, transport and set down whole stacks of tyres Large push bar with soft plastic grip cover Lever system with gas pressure springs Permanent surface protection Impact- and scratch-resistant Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.
Waste collection stand
Colour:
RAL 5010
|
Dimensions - width x depth x height (mm):
480 x 400 x 1210
Welded steel construction Holder for 240 l plastic sacks Foldable open frame for securing waste collection sack Sack opening with 40° inclination Permanent surface protection Impact- and scratch-resistant.
Tyre truck, low, galvanised
Wheelset:
Vollgummi
Welded steel construciton For tyre diameter 540 - 820 mm With wheel protection guards Makes it easy to pick up, transport and set down whole stacks of tyres Large push bar with soft plastic grip cover Lever system with gas pressure springs Galvanised Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.
Pallet converter Type 75
Colour:
RAL 7016
|
Dimensions - width x depth (mm):
1200 x 1000
|
Usable height (mm):
755
Welded steel construction Suitable for Euro and industry pallets Stackable, but do not move when stacked All 4 sides with diagonal tubes running from bottom corners to meet at top centre For subsequent fitting to loaded pallet Permanent surface protection Impact-resistant and scratch-resistant Can be collapsed or folded to save space when not in use.
Pallet converter Type 75
Colour:
RAL 7016
|
Dimensions - width x depth (mm):
1200 x 800
|
Usable height (mm):
955
Welded steel construction Suitable for Euro and industry pallets Stackable, but do not move when stacked All 4 sides with diagonal tubes running from bottom corners to meet at top centre For subsequent fitting to loaded pallet Permanent surface protection Impact-resistant and scratch-resistant Can be collapsed or folded to save space when not in use.
Steel-frame dolly with 2 angle-steel frames
Colour:
RAL 5010
|
Loading Surface - width x depth (mm):
1210 x 810
Welded steel construction Suitable for pallets or cage pallets Incl. catching corners and fastening eyelets 4 galvanised connecting tubes for insert into edges Angle-steel frame stackable on connecting tubes Variable removable Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.
Steel-cylinder truck for propane gas cylinder of 11 kg
Colour:
RAL 5010
|
Wheelset:
Vollgummi
Welded steel construction With 1 innovativ plastic safety handle Toe of sheet steel with edge surrounded on three sides For easy transport of propane gas cylinders with a capacity of 11 kg, Diameter 320 mm Cylinder holder with safety chains Permanent surface protection Impact- and scratch-resistant Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.
Pallet converter Type 65, galvanised
Dimensions - width x depth (mm):
1200 x 800
|
Usable height (mm):
1000
Welded steel construction Suitable for Euro and industry pallets Stackable, but do not move when stacked All sides open The stored goods can be accessed from all sides Stabilised by hooking together 2 horizontal frames at top Hot-galvanised Can be collapsed or folded to save space when not in use.
Steel-cylinder truck for 1 steel-cylinder of 20, 40 - 50 l capacity
Colour:
RAL 5010
|
Wheelset:
Vollgummi
Welded steel construction With 1 innovativ plastic safety handle Toe of sheet steel with edge surrounded on three sides For easy transport of steel cylinders with a capacity of 20, 40 or 50 l Diameter 210 – 250 mm Cylinder holder with safety chains Permanent surface protection Impact- and scratch-resistant Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.
Steel-cylinder truck for 2 steel-cylinders of 20 l capacity
Colour:
RAL 7016
|
Wheelset:
Luftbereifung
Welded steel construction With 2 innovativ plastic safety handles Toe of sheet steel with edge surrounded on three sides For easy transport of steel cylinders with a capacity of 20 l Diameter 205 mm Cylinder holder with safety chains Permanent surface protection Impact- and scratch-resistant Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.